Top 10 Best Microphone For Arduino Review In 2022

Our team researched on many products available on the internet for Microphone For Arduino, they chose the latest and top performing ones and prepared a list of Microphone For Arduino Reviews for you. It was a difficult task to make the shortlist of the ideal Microphone For Arduino from a lots of products on the recent market. However, We tried our best to make the best list to ensure only the Best Microphone For Arduino from our short list. Check our listings-:

1. DEVMO 3PCS Mic Microphone Sensor High Sensitivity Sound Detection Module Compatible with A-rduino PIC AVR

Buy on Amazon

• Microphone Sensor High Sensitivity Sound Detection Modules for A-rduino PIC AVR
• Uses 5V DC power supply
• Has 3mm mounting screw hole
• Has two outputs: AO, analog output, real-time output voltage signal of the microphone
• Package Includes:3pcs Microphone Sensor High Sensitivity Sound Detection Module

2. Anmbest 5PCS RED Microphone Sensor AVR PIC High Sensitivity Sound Detection Module LM393 Dual Differential Comparators Output for Arduino

Buy on Amazon

• PRODUCT ADVANTAGES: The main chip is LM393.
• ADJUSTABLE THRESHOLD: Build in potentiometer can be used to adjust the threshold level.
• EASY TO USE, INTUITIVE: When sound intensity exceed a certain threshold, produces low(Digital output 0) signal and light will be off, Otherwise output high(Digital output 1) signal and light will be bright.
• EASY TO INSTALL: There is a mounting screw hole, convenient fixed.
• WIDELY APPLICATIONS: a variety of platforms including Arduino / AVR / ARM/PIC.

3. ACEIRMC 6pcs KY-037 4pin Voice Sound Detection Sensor Module Microphone Transmitter Smart Robot Car for arduino DIY Kit

Buy on Amazon

• Microphone Sensor High Sensitivity Sound Detection Modules for A-rduino PIC AVR
• Uses 5V DC power supply
• Mic Microphone Sensor High Sensitivity Sound Detection Module Compatible with A-rduino PIC AVR
• KY-037 High Sensitivity Sound Microphone Sensor Detection Module DIY Kit
• Has two outputs: AO, analog output, real-time output voltage signal of the microphone

4. DAOKI 5PCS High Sensitivity Sound Microphone Sensor Detection Module for Arduino AVR PIC

Buy on Amazon

• There is a mounting screw hole 3mm.
• Use 5v DC power supply
• There are threshold level output flip.
• Real-time output of the microphone voltage signal / DO. when the sound intensity reaches a threshold
• The output high and low signal threshold – Sensitivity potentiometer adjustmen.

5. MakerHawk 3pcs Electret Microphone Amplifier MAX4466 Module

Buy on Amazon

• The MAX4466 is a micropower operational amplifier optimized for use as a microphone preamplifier.
• Provides a gain bandwidth of 200kHz with only 24μA of supply current.
• For the best performance, use the “quietest” supply available (on an for Arduino, this would be the 3.
• These amplifiers feature rail-to-rail output, high AVOL, and excellent power supply rejection and common-mode rejection ratios for operation in noisy environments.
• Widespread applications: This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT.

6. 10 Pieces Electret Microphone Amplifier Adjustable MAX4466 Module Microphone Preamplifier Blue Breakout Board Compatible with Arduino

Buy on Amazon

• Application: the MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x.
• Parameters: power supply voltage: +2.
• 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and ‘translate’ it into frequencies.
• Easy to use: connect GND to ground, VCC to 2.
• Power supply noise rejection function: the amplifier has good power supply noise rejection

7. Cylewet 10Pcs Cylindrical Electret Condenser Microphone Pickup with 2 Pins 9×7mm for Arduino (Pack of 10) CYT1013

Buy on Amazon

• Diameter: 9mm/ 0.35inches
• Length: 7mm/ 0.28inches
• Sensitivity: -48－66dB
• Frequency Range: 50 20KHz
• Current Consumption: Max 500uA

8. HiLetgo 2pcs Electret Microphone Amplifier MAX4466 Module Adjustable Gain Blue Breakout Board for Arduino

Buy on Amazon

• The board comes with a 20-20KHz electret microphone soldered on
• Using the MAX4466, an op-amp specifically designed for amplifier
• For the best performance, use the “quietest” supply available (on an for Arduino, this would be the 3.
• The amplifier has excellent power supply noise rejection
• This breakout board is best used for projects such as voice changers, audio recordingmpling, and audio-reactive projects that use FFT.

9. ARCELI 2pcs Electret Microphone Amplifier

Buy on Amazon

• This breakout is best used for projects such as voice changers, audio recording/sampling, and audio-reactive projects that use FFT.
• Add an ear to your project with this well-designed which has excellent power supply noise rejection.
• Using is simple: connect GND to ground, VCC to 2.
• For audio-reactive projects, we suggest using an FFT driver library which can take the audio input and ‘translate’ it into frequencies.

10. Beaster Voice Recognition Module with Microphone Dupont Jumper Wire Speech Recognition Voice Control Board for Arduino

Buy on Amazon

• This product is a speaker-dependent voice recognition module.
• This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function).
• Voltage: 4.5-5.5V, Current: <40mA
• Digital Interface: 5V TTL level for UART interface and GPIO
• Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface

• Top 10 Best groin brace Review in 2022
• Top 10 Best track torch Review in 2022
• Top 10 Best uv light for curing resin Review in 2022