Top 10 Best Muffler Weld Putty Review In 2022

Our team researched on many products available on the internet for Muffler Weld Putty, they chose the latest and top performing ones and prepared a list of Muffler Weld Putty Reviews for you. It was a difficult task to make the shortlist of the ideal Muffler Weld Putty from a lots of products on the recent market. However, We tried our best to make the best list to ensure only the Best Muffler Weld Putty from our short list. Check our listings-:

1. J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste – 3 oz

Buy on Amazon

• JB WELD EXTREME HEAT: Is formulated for repairs to iron, steel and metal in high temperature environments 1000°F / 537°C.
• THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding.
• SIMPLE TO USE: When fully cured, this metallic compound can be drilled, machined or sanded.
• VERSATILE & DEPENDABLE: Ideal for repair work on : exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters.
• DO IT YOURSELF: Big or small, you can DIY it with J-B.

2. JB Weld 8297 -DEU HighHeat Heat-Resistant Epoxy Metal Putty for All High Temperature Work

Buy on Amazon

• Temperature durable metal putty.
• Suitable for exhaust manifolds, exhaust pipes, Silencer, engine, blocks and all your high temperature needs.

3. Blue Magic 18003 High Temperature Metal Repair

Buy on Amazon

• Welds cracks and holes in iron and steel
• Withstands temperatures to 2400 degrees Fahrenheit
• Strength increases with heat
• Fills cracks, holes and pits
• Great for boilers, stoves, barbeques, furnaces, heaters

4. J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack-10 oz

Buy on Amazon

• J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding.
• CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure.
• VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius.
• SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.

5. Permatex 80333 Muffler and Tailpipe Putty

Buy on Amazon

• Permanently repairs holes and leaks in exhaust systems
• Seals out fumes at temperatures up to 2000F
• Safe for catalytic converters
• 2 pouch bonus pack
• Suggested Applications: Mufflers, tailpipes, joints and catalytic converters

6. Dynomax 35958 Hardware Muffler Cement

Buy on Amazon

• Effective for sealing exhaust joints subject to elevated temperatures
• Ideal for “out-of-round” muffler and pipe connections
• Cures in minutes
• New Walker accessories help to ensure effective exhaust repairs
• Walker supplies all of the accessories you need to do the complete exhaust job

7. Yale MC16 Muffler Cement 16oz (Pack of 2)

Buy on Amazon

• 2 x 16oz Tubes
• Seals small holes
• Cures in minutes
• Highest quality

8. J-B Weld ExhaustWeld 2″ x 72″ Repair Wrap

Buy on Amazon

• J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs.
• CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run.
• HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!.
• APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!
• EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5″ x 24″ piece of aluminum tape!
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.

9. J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick – 2 oz

Buy on Amazon

• J-B WELD HIGHHEAT: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild materials that will be exposed to high temperatures in automotive and industrial maintenance applications.
• CURE AND SET TIME: After kneading the two part formula together by hand, HighHeat takes 1 hour to set and cures in 8 hours.
• PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat has lap shear strength of 800 PSI at room temperature and 600 PSI at 400oF (204oC) or more.
• MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.
• DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
• 3 times stronger at high temperatures
• Withstands continuous heat up to 450 degrees Fahrenheit, and intermittent heat up to 500 degrees Fahrenheit.
• Strength of 800 PSI at room temperature and 600 PSI at 400 degrees Fahrenheit
• Perfect for tail pipes, mufflers, machinery, engine blocks, and exhaust manifolds
• Special Shipping Information: This item cannot be returned and has additional shipping restrictions

10. Forney Easy Weld 261

Buy on Amazon

• EASY TO USE-140 FC-I MIG machine uses 0.
• POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate
• PORTABLE WELDER- Lightweight 19 lbs.
• RUGGED- All metal case, Built to take the day to day.
• WELDER INCLUDES- 8′ MIG gun, 8′ ground clamp, Integrated handle with torch wrap and a 20A-15A adapter.
• PRODUCT SPECIFICATIONS- Dimensions: 16.
• RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031).
• Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.

• Brushed Nickel Soap Dispenser
• Brushed Nickel Floor Lamp
• Brushed Nickel Table Lamps