What factors deserve consideration when shopping for an it?
Our team researched on many products available on the internet for Pen Drilling Vise, they chose the latest and top performing ones and prepared a list of Pen Drilling Vise Reviews for you. It was a difficult task to make the shortlist of the ideal Pen Drilling Vise from a lots of products on the recent market. However, We tried our best to make the best list to ensure only the Best Pen Drilling Vise from our short list. Check our listings-:
|1||Peachtree Woodworking Supply Pen Blank Centering Vise for Drilling Center Holes in Pen Blanks Using a Drill Press||9.6||Buy on Amazon|
|2||PSI Woodworking Products CSCPENCHK Dedicated Pen Drilling Lathe Chuck||9.4||Buy on Amazon|
|3||Penn State Industries PRESSCOMBO Pen Turning Blank Drilling Centering Vise and Assembly & Disassembly Press Combo Package||9.2||Buy on Amazon|
|4||WoodRiver Pen Drilling Vise with 7mm Drilling Guide and Stop Collar||9.2||Buy on Amazon|
|5||7 Pieces Pen Barrel Trimmer Kit Pen Barrel Trimming System Mill Trimmer Set 7 mm 8 mm 3/8 Inch 10 mm Cutter Shafts||9.2||Buy on Amazon|
|6||YOST Vises 750-DI Multi-Jaw Rotating Combination Bench & Pipe Vise with Swivel Base||9.2||Buy on Amazon|
|7||Taytools 469003 Deluxe Pen Blank Centering Drill Press Vise||9||Buy on Amazon|
|8||Self Centering Pen and Bottle Stopper Drilling Vise Ideal For Wood Turners and Can Secure Wood Acrylic or Composite Materials||8.8||Buy on Amazon|
|9||Gyros Professional Swivel Head Pin Vise Hand Drill with Anti-Slip Nickel Plated Steel Body||8.6||Buy on Amazon|
|10||Wilton 550P Multi-Purpose Bench Vise||8.4||Buy on Amazon|
1. Peachtree Woodworking Supply Pen Blank Centering Vise for Drilling Center Holes in Pen Blanks Using a Drill Press
- Easily locate and drill pen blank centers and Drill through the exact center of your pen blanks with this simple but effective Pen Centering vise.
- The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise.
- Just set up the vise once and drill all of your blanks in the exact center.
- Holds blanks up to 1-1/2″ square.
- The scrap piece can be flipped, slid and reversed to get numerous uses out of a single piece.
2. PSI Woodworking Products CSCPENCHK Dedicated Pen Drilling Lathe Chuck
- Chuck weighs 1.2 lbs., and is 2.5″ in diameter.
- The jaws will secure blanks up to 1″ across, and 4″ long.
- The chuck is pre threaded to 1″ x 8 tpi to match your spindle.
- Includes two tommy bars to tighten and loosen the jaws.
3. Penn State Industries PRESSCOMBO Pen Turning Blank Drilling Centering Vise and Assembly & Disassembly Press Combo Package
- Includes PENPRESSXL Assembly & Disassembly Pen Press and DRILLCENT3 Pen Blank Drilling Centering Vise.
- DRILLCENT3 is used to drill through the exact center of pen blanks up to 1-3/4″ square; Includes (1) 2″ x 1/4″ scrap waste sleeve; Blank and drill are not included.
- PENPRESSXL is used to both assemble and disassemble pen parts on one easy to use tool; Acts as traditional pen press to press your pen parts together; Disassembly function provides invaluable way to take virtually any pen apart.
- PENPRESSXL included components: (1) press assembly with adjustment sled and handle, (6) disassembly rods, (1) spring-loaded stopper, 6″ of soft-grip tubing, (1) 7mm mechanism bushing for parts protection.
- The (6) PENPRESSXL disassembly rods handle nearly all tube diameters and parts configurations all of your pen making projects.
4. WoodRiver Pen Drilling Vise with 7mm Drilling Guide and Stop Collar
- Additional drilling guides and stop collars sold separately.
- Use with corded or cordless drill
- Drilling guides and stop collars ensure accuracy and safety
- Additional drilling guides and stop collars sold separately – Repeatable drilling every time
- Looking for the perfect Holiday Gift? WoodRiver has the best selection of saws, planes, hand tools, chisel and more.
5. 7 Pieces Pen Barrel Trimmer Kit Pen Barrel Trimming System Mill Trimmer Set 7 mm 8 mm 3/8 Inch 10 mm Cutter Shafts
- Pen barrel trimming system: the package includes 4 pieces of pilot cutter shafts in different sizes, 1 cutting head, 1 sleeve adapter and 1 hex key wrench, which can meet the requirements of most pen polishing.
- Suitable size: the pilot shafts contain the sizes of 7 mm (0.
- Quality material: the cutter shafts are made of solid carbon steel, which are rust-resistant, sturdy, durable with nice cutting strength for maximum drilling, and the sleeve adapter is made of brass; The pen barrel trimmer kit provides a practical and convenient tool for your pen blank preparation process.
- Easy to clean: the cutting shafts can easily clean and remove the extra glue, bits of wood, impurities, etc.
- Various occasions: the pilot shafts are suitable for mounting into a drill chuck, lathe chuck, drill press or hand drill, and they are helpful to polish the pen, mill the hole and clean the inner tube with the tiny size.
6. YOST Vises 750-DI Multi-Jaw Rotating Combination Bench & Pipe Vise with Swivel Base
- Extreme-Duty Casting Clamp force: 13,400 lbs. and Torque rating: 316 Ft-Lb
- Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises
- Jaw Width: 5″ (12.
- Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.
- 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.
- Machined Q235 steel main screw 0. 75″D with rolled single acme threads at 4 threads per inch
- Replaceable Hardened Steel Serrated (Top) Jaws and EXCLUSIVE SELF-ALIGNING Pipe Jaws
- 0.51″D x 9. 5″ (1.3CM x 24.1CM) Long handle with rubber bumpers
- Base mounting tabs: (4) x 9/16″D (14MM), mounting hardware not included.
- Warranty: Castings – 3 years
7. Taytools 469003 Deluxe Pen Blank Centering Drill Press Vise
- This self-centering pen blank vise allows you to firmly secure pen blanks and drill the exact center every time.
- Jaws open to a full 2-3/8” and will drill the middle of square blanks on the diagonal up to 1-7/8” square, making it useful for more than just pen blanks.
- The jaws on the drilling vice open and close together in a synchronized fashion to insure drilling in the precise center of blanks.
- The 1/2” thick anodized aluminum jaws are attached to hardwood base
- The base include a groove for a sacrificial blank to protect the base when drilling all the way through blanks.
8. Self Centering Pen and Bottle Stopper Drilling Vise Ideal For Wood Turners and Can Secure Wood Acrylic or Composite Materials
- This robust and uniquely designed Self Centering Pen Drilling Vise keeps your pen blanks secured.
- This vise can also be used to drill Both Stopper Blanks!
- Vise will accept blanks up to 2-1/8″ diagonally or up to 1-1/2″ square.
- The Self Centering Drill Press Vise also includes three sacrificial MDF Plates to slide underneath the blanks to protect the vise base when drilling through blank.
- The solid metal construction makes this vise perfect for any pen turner.
9. Gyros Professional Swivel Head Pin Vise Hand Drill with Anti-Slip Nickel Plated Steel Body
- DURABLE AND PRECISE: This Gyros handheld drill is constructed of nickel-plated steel to ensure the pin vice drill is ready for hobby, professional, and precision jobs it will be used for.
- UNIQUE PRODUCT FEATURES: This manual drill is equipped with a swivel head for comfortable operation, while its octagonal shape helps prevent rolling.
- WIDE SIZE RANGE: Equipped with two reversable collets, this mini hand drill has a size range of 0” (0 mm) to 3/32” (2.
- MULTIPLE USES: This unique finger drill has many different uses given the diverse nature of the tool.
- 1 YEAR LIMITED WARRANTY: – Gyros Professional Swivel Head Pin Vise Hand Drill comes with a 100% Guaranteed Product Satisfaction, and 1 Year Limited Manufacturer’s Warranty.
10. Wilton 550P Multi-Purpose Bench Vise
- QUICK SETUP: Indexed at 30 degree increments for quick set up
- STRONG GRIP: Replaceable hardened steel jaws with a serrated pattern ensure grip and a long life
- 360 DEGREE ROTATING HEAD: Can clamp material at any angle
- PERFORMANCE: Has built-in pipe jaws and a V-jaw to easily hold round objects vertically
Leave a Reply